570N EP Tractor Loader

OPERATOR ENVIRONMENT

• ROPS/FOPS certified protective canopy
• Non-suspension seat – 15 degree and 30 degree swivel to the right

ENGINE

• FPT 3.4 L diesel
• Cooled EGR

DRIVETRAIN

• Front axle, as selected:
  • 2WD heavy-duty front axle with 11.0 L x 16.0 tires
  • 4WD heavy-duty mechanically driven rear axle, with 12.0 L x 16.5 tires
• Rear axle:
  • 2/4WD heavy-duty outboard planetary drive, with 17.5 L x 24.0 tires

LOADER

• Bucket position indicator
• Lifting lugs on standard bucket
• Single lever control, with Self-Leveling and Return-to-Dig
• Hand-operated clutch disconnects on loader and shift levers
• Single lever 5-function loader control:
  • Lift; Dump; Auxiliary function; Clutch cut-out; Differential-lock

OPERATOR ENVIRONMENT

• Manual Ride Control
• ROPS and FOPS certified protective canopy:
  • Short and standard height
• ROPS certified cab with heater, defroster, front and rear wipers and floor mat

TRACTOR

• Auxiliary work lights:
  • 2 front and 2 rear flood for tall canopy and cab
• 440 lb (200 kg) front counterweight
• Hand throttle – electric
• 500 lb (227 kg) counterweight, bolted to hitch frame
• 5th spool auxiliary circuit for 3-point hitch valve
• Tool portfolio of additional attachments
• 3-point hitch with 600 lb (272 kg) Plug in counterweight – cannot be used with PTO
• Driveshaft guard
• 3,000 lb (1 360 kg) rear counterweight
• Rear wheel weights 564 lb (256 kg)
• PTO: 
  • 540 RPM, hydraulically powered rear PTO Ready. PTO hydraulic pump only, no motor

LOADER

• Auxiliary hydraulics for loader-mounted equipment
• Hydraulic front quick coupler
• Mechanical front quick coupler
• Buckets – less teeth:
  • 82 in (2.08 m) general purpose Long Lip, with bolt-on cutting edge – includes lift eyes
  • 82 in (2.08 m) general purpose Long Lip, without bolt-on cutting edge – includes lift eyes
  • 82 in (2.08 m) 4 IN 1®, includes 3 Bolt-on cutting edges; Unit must be equipped with auxiliary loader hydraulics
  • 93 in (2.36 m) light duty loader bucket
• Loader linkage without loader bucket

BASE & EXTENDED WARRANTY COVERAGE

• 1-Year/Unlimited-Hour Full-Coverage Base Limited Warranty
• 2-Year/2,000-Hour Extended Engine Warranty
• Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.
• Drive Train Warranty - Drive (flex) plates / flywheel, drive axle assembly, drive couplings, drive shafts / universal joints, final drive / planetary, hydraulic drive motor, hydraulic drive pump, hydraulic pump when used as a power source for drive pump or drive motor, propulsion planetary drive, pump drive coupling, pump drive gearbox, seals in idlers and rollers, swing reducer transmission, torque converter, track steering brakes and clutch, transfer gear group, transmission charge pump, transmission / transmission control valve, transmission electronic controller, trencher drive gearbox, turntable bearing / swing gear / hydraulic swivel, and wet brakes / wet clutch.

PURCHASED PROTECTION

• Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Loader/Tool Carrier models.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.