CX75C SR

OPERATOR ENVIRONMENT

• FOPS Level 1 cab top guard
• Pressurized cab
• One-touch lock front window
• AC/heat/defrost w/ auto climate control
• 6 watt interior dome light
• Mechanical-suspension cloth seat
• Adjustable armrests
• Low-effort joystick controls
• Controls pre-wired for auxiliary
• Blade control lever
• AM/FM radio w/ antenna and 2 speakers
• Anti-theft start code system
• Rubber floor mat
• 12-volt electric socket
• 24-volt cigarette lighter
• External rear view mirrors
• Windshield wiper/washer
• Cup holder
• Storage compartments
• Travel alarm w/ cancel switch
• One key start and lock-up
• Built-in full-color LCD monitor
• Safety glass for all windows
• Polycarbonate roof hatch
• Sun shade

ENGINE

• Isuzu four-cylinder turbo-charged diesel
• Tier 4 Final Certified
• Electronic fuel injection
• Neutral safety start
• Auto-engine warm up
• Glow-plug pre-heat
• One-touch idle
• Dual-stage fuel filtration
• Dual element air filter
• Remote oil filter
• Green plug oil drain
• 500-hour engine oil change interval
• 24-volt system
• Color LCD monitor
• Auto idle shutdown system

HYDRAULICS

• ISO pattern controls
• 5,000 hour hydraulic oil change interval
• 1,000 hour hydraulic filter change interval
• Mechanical disc brakes
• Three (3) work mode settings

UPPER STRUCTURE

• Right and left side mirrors
• Viscous mounted cab – fluid
• Common key vandal locks
• Upper mounted work light – 70 watt
• Cab mounted work light - 70 watt
• Swivel guard belly pan

UNDERCARRIAGE

• 1 ft 6 in (0.45 m) steel shoes, triple semi-grouser
• Full overlap turntable bearing tub
• Front track chain guides
• Hydraulic track adjustment
• X-pattern carbody

FRONT BLADE

• Hydraulically controlled front blade:
  • 7 ft 7 in (2.32 m) width
  • 1 ft 6 in (0.45 m) height

ATTACHMENT

• Standard boom and arm:
  • Boom – 12 ft 4 in (3.75 m)
  • Arm – 5 ft 7 in (1.71 m)
• Offset boom and arm:
  • Boom – 12 ft 9 in (3.89 m)
  • Arm – 5 ft 9 in (1.75 m)
• Boom mounted work light – 70 watt
• Attachment cushion valve

HYDRAULICS

• Standard boom:
  • Multi-function auxiliary hydraulics:
    • Single acting
    • Double acting
• Offset boom:
  • Double acting hydraulics only

ATTACHMENT

• Arm for std. boom – 7 ft 2 in (2.19 m)
• Coupler/Case multi-pin grabber
• Heavy-duty bucket

UNDERCARRIAGE

• 23.6 in (600 mm) steel shoes, triple semi-grouser*
• 1 ft 6 in (0.45 m) rubber pads bolted to standard rail

*Note: blade will not fully cover 23.6” shoe

OPERATOR ENVIRONMENT

• Control pattern selector
• FOPS cab top guard – Level 2
• Front grill guard – 2 x 2 screen mesh
• Front rock guard:
  • Vertical bars – fixed/one piece/OPG 2

Base & Extended Warranty Coverage

• 1 Year / 1,800 Hour Full Coverage Base Warranty
• 2 Year / 2,000 Hour Engine Warranty

Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump.

Note: Warranty does not cover any configuration excavator equipped with feller buncher or accumulator attachments.

Purchased Protection

Purchased Protection Plan is an extension of the factory base and extended coverage is available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Excavator models.

Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.