Page added to favorites

Equipment

Wheel Loader

621F

High Performance

Hotspots

FO-Pás-Carregadeiras-Hotspot
F-Pás-Carregadeiras-Hotspot-1

With Tier 3 certification, the engine features the perfect optimization between high power and low consumption.

F-Pás-Carregadeiras-Hotspot-2

Roomy cab, which adapts the equipment to the operator’s needs by means of adjustable and easy to reach controls.

F-Pás-Carregadeiras-Hotspot-3

3 power curves and 4 operation modes, which allow using the most suitable power to the application.

FEATURES

Resources

Open Close

OPTIONS

  • Also available in XT (Toolcarrier) and XR (Extended Reach) configurations.

ENGINE

  • Reliable CASE 6.70L-Liter Engine with quick throttle response, best-in-class horsepower and massive torque.

POWER

  • Three power curver and four work modes allow you to fit the power to your specific application.

CUTTING EDGE

  • The cutting edge was extended forward for rapid and easy penetration into the pile.

UNOBSTRUCTED VIEW

  • An unobstructed view to the console’s analog gauges and indicator lights keeps operator informed of critical machine functions.

SPACIOUS CAB

  • The spacious cab matches the machine to the operator's requirements through adjustable controls and easy-to-reach switch locations.

REAR HOOD

  • The rear hood, electrically actuated, provides complete access to the engine and daily maintenance checks.

POWERFUL AND QUICK HYDRAULICS

  • Powerful and quick hydraulics deliver superior productivity and performance.

Specifications

Open Close
Limited slip front differential Limited slip on front and rear axles
Straight tipping load 10.232 kg / 22.557 lb
Main pumps full flow Variable displacement / 171 l/min - 45,2 gpm
Reach, 45º dump, 2,14 m (7 ft) height 1.468 mm / 57,8”
Bucket reach – fully raised, 45° dump 36,2” / 919 mm
Turning Radius, Outside of tire 5.245 mm / 206,5”
Operating weight 12.084 kg / 26.641 lb
Axle oscillation 24º
Lift Capacity at full height 7.401 kg / 16.316 lb
Hinge pin height 3.831 mm / 150,8”
Bucket breakout force 12.348 kgf / 27.222 lbf
Peak torque @ RPM 730 N.m / 538 lbf.pie
Transmission type 4F/3R Proportional w / Electronic Control Module, automatic / manual and torque-sensing modulation
Full turn tipping load 8.986 kg / 19.811 lb
Net engine power 162 hp / 121 Kw
Bucket capacity 1,64 m³ / 2,15 yd³

Standard Equipment

Open Close

OPERATOR’S COMPARTMENT

  • ROPS/FOPS cab with heater.
  • Key start.
  • Articulated power steering w/tilt column.
  • Fully adjustable, suspension seat.
  • Foot throttle.
  • Loader control lever with wrist rest.
  • Cup holder.
  • Coat hook.
  • (1) Interior rear view mirror.
  • 51 mm (2”) retractable seat belt.
  • Storage tray behind seat.
  • Lunch box compartment.
  • Single brake pedal.
  • F/N/R shuttle switch.
  • Glove box.
  • Pressurized air filtering.
  • Anti-glare window strip.
  • Defroster.
  • Side window, full/partial opening.
  • Roof light.
  • Wipers, rear and intermittent front.
  • Windshield washers, front and rear.
  • Rubber floor mat.

ENGINE

  • F4HFA613F.
  • Selectable work modes.
  • Auto power.
  • Max power.
  • Standard power.
  • Economy power.
  • Turbocharger.
  • Engine oil integral cooling.
  • Intake air cooling.
  • Automatic fan belt tensioner.
  • Fuel filter with water separator.
  • Dual element dry type air cleaner.
  • Hydraulic driven cooling fan.
  • 65 Amp alternator.
  • (2) 12-volt 700 CCA batteries.
  • Liquid-cooled radiator.
  • Mid-mounted cooling module.
  • Common Rail electronic fuel injection.

LOADER

  • Arm with Z kinematics.
  • Single control for lift and tilt.
  • Positive retention float.
  • Automatic return-to-dig.
  • Automatic height control.
  • Automatic return-to-travel.
  • Brake pedal transmission disconnect.
  • Bucket position indicator.

POWERTRAIN

  • 4-wheel drive.
  • 4F/3R selectable auto/manual shift transmission.
  • Electronic Control Module – Programmable, computer controlled proportional shifting with programmable gear selection.
  • On-board diagnostics.
  • Electronic single-lever ride control.
  • F/N/R switch in loader control lever.
  • Downshift button.
  • Torque converter.
  • Outboard planetary axles.
  • Limited slip differential.
  • Transmission oil cooler.
  • Brake pedal transmission disconnect.
  • Hydraulic brake discs in oil bath.
  • Spring-applied hydraulic release parking brake.
  • Limp-Home Mode.
  • Greasable rear axle trunnion.

HYDRAULIC SYSTEM

  • Single lever with 2-spool loader control valve.
  • Low-effort steering.
  • Hydraulic driven fan.
  • (8) diagnostic quick couplers.
  • Split flange hydraulic connections (1" or greater).

ELECTRICAL SYSTEM

  • Alternator and voltage regulator.
  • Electrical disconnect.
  • Batteries.
  • Electric starter.
  • Front and rear halogen lights.
  • Tail lights and stop lights combined.
  • (2) headlights (high/low beam).
  • (2) work headlights.
  • (2) tail lights/LED stop lights.
  • (2) work tail lights.
  • Turn signals/warning light.
  • Stop switch/key start.
  • Centrally located fuse box with all electrical circuits protected.

OTHERS

  • Electric hood lift.
  • Front and rear fenders.
  • Standard counterweight.
  • Drawbar hitch.
  • Articulation locking bar.
  • Lift arm locking bar.
  • Lift and tie-down points – front/rear.
  • Back-up alarm.
  • Remote drain points.
  • Remote-mounted ecology drains for.
  • Engine oil.
  • Engine coolant.
  • Hydraulic oil.

Optionals

Open Close

OPERATOR’S COMPARTMENT

  • Fabric seat with pneumatic suspension.
  • Sound Shield noise suppression package.
  • Cab air-conditioning w/heater.
  • Radio.
  • Radio-ready (12 or 24-volt) with auxiliary power (12-volt).
  • Cab convenience package.
  • RH steps and platform.
  • Rotating beacon.
  • Second brake pedal.
  • Open ROPS/FOPS cab.
  • Joystick steering.
  • External rear view mirrors.
  • Rear-view camera with accessory mounting bar.
  • Extra front-facing work lights.

LOADER

  • XR extended reach version.
  • Integrated toolcarrier XT version.
  • Auxiliary hydraulics attachment.
  • Loader coupler systems (compatible with JRB or ACS).
  • Buckets (see pages 3 through 6).
  • 4-1 grapple buckets.
  • Forks.
  • Material handling arm.
  • Brooms.

POWERTRAIN

  • Special application axles with auto-locking front differential and open rear differential.
  • Commodity King package with heavy debris cooling system.
  • Cold weather package.
  • Heavy-duty (2) 12-volt 950 CCA batteries.
  • Fuel heater.
  • Hydraulic oil cooler bypass.
  • Low temperature hydraulic oil.
  • Grid heater.
  • Full-view or ejector type pre-cleaner.
  • Remote jump start receptacle.

HYDRAULIC SYSTEM

  • Auxiliary hydraulics.
  • Ride control.
  • Secondary steering.
  • 3-spool loader valves with 2-lever loader control (joystick plus lever).
  • Variable speed hydraulic reversing fan.
  • Hydraulic cooler.

TIRES

  • 20.5-25 12 PR L2 bias (dirt/traction).
  • 20.5-25 16 PR L2 bias (dirt/traction).
  • 20.5-25 12 PR L3 bias (rock).
  • 20.5-25 16 PR L3 bias (rock).
  • 20.5 R25 L2 radial (dirt/traction).
  • 20.5 R25 L3 radial (rock).
  • 20.5 R25 Michelin SnoPlus radial.
  • 20.5 R25 Bridgestone Snow Wedge radial.
  • SolidFlex HD solid rubber tires in adaptation rims.
  • Spare wheels and tires.
  • Axle oscillation stops.
  • Chock blocks.

OTHERS

  • Full coverage fenders.
  • Access steps on both sides.
  • Interior protection.
  • Side guards for rear frame.
  • Tool box – ground level access.
  • Extra counterweight.
  • Fire extinguisher.
  • License plate bracket.
  • 12.4 mph (20 kph) maximum speed control.
  • Special paint.

FIND A DEALER

CASE dealers provide world-class equipment and aftermarket support, industry-leading warranties and flexible financing.

To start your search, please enter the following information:

Search now

What can we help you find?

0 result (s) found
Type
Filtered by:

No results found

Click this icon throughout the site to add pages to your favorites.

My CASE favorites

0 result (s) found