ENGINE
Model
FPT F4FHE613J*A017
Cylinders
6
Displacement
6.7 l
Fuel injection
Direct common rail
Fuel filter
Spin-on w/ in-line strainer
Air intake
Cross-flow
Cooling
Liquid
Engine speeds
RPM
High idle – no load
2200 +/- 50
Rated – full load
2200
Low idle
800 +/- 25
Horsepower SAE J1349:
Engine rated net power
214 hp - 160 kW @ 2200 rpm
Engine max net power
232 hp - 173 kW @ 2200 rpm
Engine Peak Power
246 hp-184 kW @ 1800 rpm
Rated net torque
1004 Nm
Max net torque
1082 Nm
Engine lubrication
Pump
Deep sump plate cooler w/ pressurized under-piston nozzles
Pump operating angle ratings:
Side-to-side
35°
Fore and aft
45°
Radiator:
Core size area (Water Radiator)
0.33 m²
Rows of tubes
4
Fan
Diameter
700 mm
Ratio
hydraulically driven
POWERTRAIN
Dual path hydrostatic
Pump
Variable axial piston
Motor
Variable bent axis piston
Max. drawbar pull*
360 kN
Transmission
Single lever control electronic straight tracking
Oil filter
2 micron, spin-on, replaceable
Travel speeds* Forward
0 – 9.8 km/h
Travel speeds* Reverse
0 – 9.8 km/h
Parking brakes
Heavy-duty, spring-applied, hydraulic pressure release
Steering brakes
Hydrostatic
Final drive
2 helical gear reduction to planetary output
Ratio
48.75 :1
TRANSMISSION COOLING
Type
Oil to air
Core size
0.31 m²
SERVICE CAPACITY
Fuel tank
405 l
AD Blue Tank
62 l
Engine oil w/ filter
16.4 l
Engine oil w/o filter
15.6 l
Engine cooling system
38 l
Hydraulic reservoir
210 l
Final drive - per side
25 l
Track rollers - each
0.35 l
Front idlers - each
0.33 l
Carrier rollers - each
0.31 l
UNDERCARRIAGE
Track adjustment
Hydraulic
Frame
Oscillating equalizer beam suspension and pivot shaft
Track link pitch
"Heavy-Duty" track
203 mm
"Ultra-Life" track
203 mm
Track shoe height
71.5 mm
Pin diameter
44.5 mm
Bushing diameter
"Heavy-Duty" track
72 mm
"Ultra-Life" track
93 mm
Track shoes per side
40 LT, 45 XLT/WT/LGP
* with 610 mm shoes and PAT blade
Track rollers per side
LT
7
XLT/WT-LGP
8
Carrier rollers per side
2
Track roller rail diameter
227 mm
ELECTRICAL SYSTEM
Alternator
120 amps
Batteries (2)
12-volt, low-maintenance 1200 cold-cranking amps @ -18°C
OPERATOR ENVVIROMENT
Operator environment
ROPS/FOPS cab; Pneumatically suspended seat; w/ back adjustment; Seat belt; Adjustable armrests; Foot rests; Tool storage area; Headliner; Floor mat; Tilting seat platform; Noise level 77.2dbA.
Warning lights
Air filter; Alternator; Diagnostic fault indicator; Engine coolant temperature; Engine oil pressure; Hydraulic filter; Low fuel level; Park brake engaged; Service soon indicator; Transmission filter; Transmission charge pressure.
Gauges
Battery voltage; Digital hourmeter/tachometer diagnostic/service reminder; Fuel level; Transmission oil temperature; Transmission speed indicator; Water temperature.
Audible warnings
Engine coolant temperature; Engine oil pressure; Low fuel level, Transmission charge pressure; Transmission/hydraulic temperature.
HYDRAULICS
Pump flow @ 2200 RPM
179.5 l/min
Max pressure
248 bar
Lift Cylinder PAT
nr. 2
Bore diameter
114.3 mm
Rod diameter
63.5 mm
Stroke
428 mm
Angle cylinder PAT
nr. 2
Bore diameter
114.3 mm
Rod diameter
63.5 mm
Stroke
502.7 mm
Tilt cylinder PAT
nr. 1
Bore diameter
127 mm
Rod diameter
63.5 mm
Stroke
148.3 mm
Lift cyclinder Bull Dozer
Bore diameter
88.9 mm
Rod diameter
57.2 mm
Stroke
1074 mm
Tilt cylinder Bull Dozer
Bore diameter
114.3 mm
Rod diameter
63.5 mm
Stroke
98.9 mm
TRACK ON GROUND
Shoe area
610 mm
32856 cm² LT, 38952 cm² XLT
710 mm
46093 cm² WT
760 mm
48690 cm² WT
910 mm
58753 cm² LGP
PAT BLADE
Variable blade pitch - adjustable
55° +/- 5°
Lift speed - per second
483 mm
Cutting edge
Reversible, replaceable
Width
200 mm
Thickness
20 mm
RIPPER
Max. penetration
491 mm
Width
1953 mm
Cut width
1889 mm
Max. ground clearance
577 mm
Max. number of shanks
3
Tooth spacing w/3 teeth
944 mm
Hydraulic cylinder
Double-acting
Diameter
155 mm
Stroke
596 mm
Rod
69 mm