CX370D
The CX370D excavator delivers all the benefits offered by the CX350D with the plus of having a 2 piece boom variation especially for jobs where it is needed to work closer to the machine, relying on sturdier reinforced arms but also lifting some more tons, thanks to a 5% better lifting capacity, while sharing the same body structure, engine and hydraulic output of the CX350D. For when you need that extra bit of added versatility and productivity, the CX370D is the right answer to your needs.
DOWNLOADS
Download Brochures
Share or download a brochure for additional information.
Weight
38.0 t
Power
210 kW / 282 hp
Solutions
CASE SiteWatch™
Boost your machine's profitability by tracking and managing your fleet's operation.
CASE SiteConnect
Reduce your Total Cost of Ownership by increased connectivity resulting to more efficient service.
CASE SiteControl™
MACHINE CONTROL SOLUTIONS
The Leica iCONstruct portfolio offers you a straightforward solution that you can customize to match the specific requirements of your road and building construction business.
SPECIFICATIONS
Standard Equipment
- Isuzu 6-cylinder turbo-charged diesel
- EU stage V Certified
- Selective Catalytic Reduction (SCR)
- Diesel Oxidation Catalyst (DOC)
- Cooled Exhaust Gas Recirculation (CEGR)
- Diesel Particulate Diffuser (DPD)
- VGT turbocharger
- Electronic fuel injection
- High pressure common rail system
- Neutral safety start
- Auto-engine warm up, emergency stop
- Glow-plug pre-heat
- Engine Protection Feature (EPF)
- Dual-stage fuel filtration
- Dual element air filter
- Remote oil filter
- Green plug oil drain
- 500-hour engine oil change interval
- 24-Volt system
- Battery disconnect switch
- External Fuel and AdBlue gauges
- Fuel cooler
- Fuel filter restriction indicator
- Fuel prefilter Water sensor with dedicated message on Cabin monitor
- Idle start
- Radiator, oil cooler, intercooler – protective Screen
- Refueling Pump
- Auto-idle
- One-touch idle
- Auto-idle shut-down
- Torque control
- Boom Economy Control (BEC)
- Swing Relief Control (SWC)
- Spool Stroke Control (SSC)
- Electronically controlled hydraulic pumps
- Auto power boost
- Auto travel speed change
- Selectable work modes
- Overload warning device
- ISO pattern controls
- Pre-set auxiliary pump settings
- Switch controlled auxiliary selection
- Auxiliary valve
- Hydraulic filter restriction indicator
- Oil cooler
- 5,000 hour hydraulic oil change interval
- 2,000 hour hydraulic filter change interval
- ISO mirrors
- Handrail and
- Isolation mounted cab (fluid and spring)
- Lifting eyes for counterweight
- Lockable fuel cap, service doors and toolbox
- Rear and side view safety camera
- ROPS protection
- FOPS guard OPG level II
- Pressurized cab
- Tempered safety glass
- One-touch lock front window
- Sun visor&rain deflector
- AC/heat/defrost w/auto climate control
- Hot&coolbox, cup holder & ashtray
- Interior dome light
- Cloth covered air-suspension high-back seat
- Sliding seat – 90 mm
- Seat-belt
- Adjustable armrests
- Tilting consoles - 4-position
- Low-effort joystick controls
- Sliding cockpit 180 mm
- Auxiliary select system
- Aux-in port for personal electronics
- Multifunction LED color monitor (180 mm)
- 26 selectable languages for monitor
- Anti-theft system (start code system)
- Rubber floormat
- 12-volt electric socket
- 24-volt cigarette lighter
- One-piece right hand window
- Working lights (boom&upperstructure)
- Cab top working lights
- Windshield wiper / washer
- Clear (Lexan) roof window w/sunshade
- Storage compartments
- On-board diagnostic system
- Standard boom 6.45m (CX350D)
- HD boom 6.45m (CX370D)
- Arm 3.25 (CX350D)
- HD arm 3.25 (CX370D) with reinforcement plate and bars
- Auxiliary pipe brackets with guard bar
- Centralized lube bank
- Attachment cushion valve
- FOR 2PB
- 1st Boom length 3460 mm
- 2nd Boom length 3100 mm arm 3.25
- 600 mm steel triple grouser shoes
- Full overlap turntable bearing tub
- Sealed link chain
- Lashing points
- Double track guide (CX350D, CX370D 2PB)
- Full track guide (CX370D)
SPECIFICATIONS
Optional Equipment
- Low-flow circuit, proportional control
- Single acting pedal activated hammer circuit
- Single acting hammer circuit with electrical proportional control
- Multifunction (hammer/high flow) circuit with electrical proportional control
- Arm - 2.20/2.63/4.05 m (CX350D)
- Arm - 2.63 (CX370D 2PB)
- HD Arm - 2.20/2.63 (CX370D)
- Hydraulic quick coupler provision
- Safety valves and bucket linkage with hook
- Front cab guard - vertical bars (OPG level 2)
- Front cab guard - vertical bars (OPG level 1)
- Front mesh screen
- Travel alarm
- AM/FM CD/radio with antenna and 2-speakers
- LED working lights
- LED lights (8 lights included side view camera with LED lights)
- CASE Maximum View Monitor (CMVM) - 3 cameras system
- Side view camera with LED lights (right and left)
- 700 mm steel triple grouser shoes
- 800 mm steel triple grouser shoes
- 900 mm steel triple grouser shoes (only for CX350 LC)
- Full track guide (CX350D/CX370D 2PB)
- Double (CX370D MONO)
- Three years SiteWatch “Advanced” subscription with remote monitoring and one user’s licence
- Engine and hydraulic oil sampling ports
- Retractable roller screen option available for rear cab window (as DIA kit only)
Compatible Attachments
Your CASE equipment is the platform - your attachments make the difference in how much work you win and how profitable your machine is.
Buckets for Direct Fit and G type quick coupler
Wide range of buckets for Direct fit and/orfor G type quick couplers.
Buckets for Direct Fit or MultiFit quick coupler
Wide range of buckets for Direct fit and/or for MultiFit "S" quick couplers.
G type hydraulic quick coupler
Universal hydraulic quick coupler to allow easy change of pin-on buckets and attachments with absolute safety.
Primary crusher
Ideal for the most delicate primary demolition phases, reinforced concrete structures and removal of materials at significant heights.
SPECIFICATIONS
Compare Specifications
ENGINE | ||||
Model | ||||
Type | ||||
Emissions level | ||||
Number of cylinders/ Displacement (l) | ||||
Bore and stroke (mm) | ||||
Rated flywheel horse power - SAE J 1349, ISO 9249 (kW / hp) | ||||
Rated flywheel horse power - ISO 14396 (kW / hp) | ||||
Rated flywheel horse power - With fan pump (kW / hp) | ||||
Maximum torque - SAE J 1349, ISO 9249 (Nm) | ||||
Maximum torque - ISO 14396 (Nm) | ||||
HYDRAULIC SYSTEM | ||||
SWING | ||||
FILTERS | ||||
ELECTRICAL SYSTEM | ||||
UNDERCARRIAGE | ||||
CIRCUIT AND COMPONENT CAPACITIES | ||||
SOUND LEVEL | ||||